PDR - Scule pentru indreptarea indoiturilor

NTools BL-30 dent pusher NTools BL-30 is an instrument designed to paintless dent removal by push..

NTools BL-60 dent pusher NTools BL-60 is an instrument designed to paintless dent removal by push..

NTools BR-30 dent pusher NTools BR-30 is an instrument designed to paintless dent removal by push..

BR-30, lungime 30 cm, grosime. 4 mm, 2x offset indoit, dreapta, varf plat..

BT-35: 35 cm long, 6 mm thick, 1 x bent, rounded tip...

BT-35: 35 cm lungime, 6 mm grosime, 1 x indoit, varf rotunjit...

BT-60: 60 cm lungime, 11 mm grosime, 1 x indoit, varf ascutit rotunjit...

BT-90: 90 cm lungime, 12,5 mm grosime, 1 x indoit, varf ascutit rotunjit...

BTM-70 dent pulling tool with rounded fitting (cylindric) 70cm long, 12.5mm thick, 2x bent...

Racord rotunjit BTM-70 (cilindru) 70 cm lungime, 12,5 mm grosime, 2x indoit..

CB-35: 35 cm long, 6 mm thick,2 x bent, flat tip...

HK-LG: 60 cm long, 8 mm thick, 1 x bent, flat tip (for doors)...

HK-MD: 55 cm long, 8 mm thick, 1 x bent 90o, flat tip (For doors)...

HT-10: 10 cm long, 6 mm thick, flat tip...

J-HAK 50 cm long, 8 mm thick, U- bent, flat tip...

J-HAK 50 cm lungime, 8 mm grosime, indoit in U, varf plat...

LB-60: 60 cm long, 9.5 mm thick, 2 x bent, flat tip...

LB-60: 60 cm lungime, 9,5 mm grosime, 2 x indoit, varf plat..

LB-90 cm lungime, 11 mm grosime, 2 x indoite, varf plat...

MT-50: 50 cm lungime, 5 mm x 3 mm grosime, forma flip, ?varf foarte mic?..

PB-60: 60 cm long, 9.5 mm thick, 1 x bent, flat tip...

Set of devices for paintless dent removal by the method of pushing out on the convex side of the den..

Set de dispozitive pentru indepartarea adanciturii fara vopsea prin metoda impingerii pe partea conv..

Sistemul NTools PDR a fost creat pentru atelierul unde un element foarte important este mobilitatea ..

SB-60: 60 cm long, 9.5 mm thick, 3 x bent, flat rounded tip...

SB-60: 60 cm lungime, 9,5 mm grosime, 3 x indoit, varf rotunjit plat...

SWL- 40: 40 cm long, 6 mm thick, 1 x bent, flat tip, asymmetric left (for reinforcing)...

SWL-40: 40 cm lungime, 6 mm grosime, 1 x indoit, varf plat, asimetric stanga (pentru intarire)...

W45-1-30:30 cm lungime, 3 mm grosime, 1 x indoit, varf plat (pentru intarire)..

W45-3-30: 30 cm long,5 mm thick,1 x bent, flat tip (for reinforcing)...

W45-3-30: 30 cm lungime, 5 mm grosime, 1 x indoit, varf plat (pentru intarire)...

WR-1-30: 30 cm long, 3 mm thick, 1 x bent, flat tip (For reinforcing)...

WR-1-30: 30 cm lungime, 3 mm grosime, 1 x indoit, varf plat (Pentru intarire)..

WR-3-30: 30 cm long, 5 mm thick, 1 x bent, flat tip...

WR-3-30: 30 cm lungime, 5 mm grosime, 1 x indoit, varf plat..

WT-10-LG: 10 cm long, 9 mm x 3mm thick, fin-shape, large tip...

WT-15-SM: 15 cm long, 6 mm x 2mm thick, flip shape, 'small tip'...

WT-15-SM: 15 cm lungime, 6 mm x 2 mm grosime, forma flip, ? varf mic?..